Mineral Processing Equipment No Further a Mystery

Are you looking for a simple efficient gold recovery procedure?

Let me tell you about mineral processing equipment that’s being used successfully all around the world, by large scale mining operations through to artisanal miners.

It is an alternative to using cyanide.


Among the most simple and efficient technology does not call for the use of dangerous chemicals.

Sure, with a cyanide solution for gold leaching is widespread.

BUT, as Wired magazine by the UK points out…

The waste product from cyanidation is a disgusting and poisonous gloop that could float into rivers or toxin groundwater, killing wildlife and producing landscape sterile. Enormous pits of ore can be exposed to cyanide leaching in colonies, together with the runoff a significant environmental hazard that requires a significant cost to stay secure.

Instead of that, why don’t you use gravity?


Gravity separation of fine gold has been the functioning principle in many low-cost mineral processing plants, all around the world.

That’s in both small-scale and large scale mineral extraction operations.

For instance, a small gold shaking table employs a low-capacity vibrating table for gold extraction.

Naturally, it’s not just for extracting gold. Mineral extraction using a focusing table functions for recovering other valuable metals and minerals too, including all significant minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.

The Wave Table is perfect for cleaning up sluice box separating and concentrates gold from black sands, also. The Wave Table is perfect for cleaning up concentrates from Knelson, Falcon, Knudsen, STLBs and other centrifugal concentrators. (For big throughputs and high capacity mining/processing surgeries, particularly for gold, we will be able to help you with the most cost effective Centrifugal Concentrators.)


Larger plantations are using Wave Tables to perform closing gold clean-ups and also the’finishing’ of gold concentrates. This process removes the need to use cyanide or mercury.

Gold tide tables are lots better for the environment, in addition to for workplace safety!


When you want to efficiently recover fine gold from gold bearing ore, you need a Centrifugal Concentrator. For instance, a 1-3 TPH unit will take care of both alluvial and hard rock substance.

In a huge mineral processing plant, you may use a Centrifugal Concentrator (known in some countries as an STLB) to perform the key concentration. That is, to regain all of the gold and heavy minerals from the ore feed.

This recovered substance is known as the’concentrates’, or’cons’ for short.

But to really get’clean gold’, you have to then conduct the cons through another process (a secondary concentrator), like running the drawbacks over a Wave Table. By doing this, an upgraded fraction is regained that is a lot smaller in bulk, so it is easier to take care of.

When targets are cleaned upon a Wave Table, you produce clean gold ready to be smelted and become a gold bar for sale.

This without using cyanide or mercury.


Another cyanide-free option is chemical leaching.

Gold can be extracted from run of mine ore in addition to from concentrates by using the Chemical Leaching System, and it can be a cost effective non-cyanide gold leaching system that GoldWaveTables.com can help you with.

CLS can be used for almost any metal but is especially used for the recovery of gold, silver and platinum group metals.


This unbelievable gold separation device comes in 3 versions covering all scales of operation. Despite the name, a golden wave table works to extract ANY heavy mineral, where there’s a specific gravity (density) differential between the valuable heavy mineral constituent as well as its gangue or host substance. Additionally, it cleans grit and gold in the stripped carbon employed in CIP/CIL software.


To quote Ian, a 30-year experienced in the mining and minerals industry,”I have had success with the Wave Table recovering very fine heavy minerals like gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. Because it is so effective at recovering very nice particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will easily recover 5 micron gold from tailings. In mineral processing, it’s often that which you lose to tailings that’s as important as what you recover. I’ve discovered that the Wave Table is the greatest device to check tailings for missing heavy minerals, such as gold. A simple test on your tailings will only require a few minutes. You may observe any heavy nutrient dropped in the tailings within a brief time period. This type of test will obviate the need for prolonged firing assay turn around times.”


The most significant model is the M10 that does up to 8TPH (tonnes per hour) and the M8 version does up to 1TPH. The smallest model, the M5, is suitable for small cleanups of 20 kgs per hour and can be utilised as a laboratory unit.

– Better for workplace safety too

– Low water usage

– efficient and cost-effective.

Whenever you’re on the lookout for gold recovery plant available, check out GoldWaveTables.com


The Wave Table may be utilized in the smallest to the largest gold mine. They may be used for full scale manufacturing functions, or simply as a clean-up or concentration device from the golden room.

The Wave Table is now increasingly used to recover gold from evaluation samples of a few kgs in size and upward. This kind of majority testing is quick and the quantitative results mean that you are not solely relying on fire assays or AAS, especially in visible free gold deposits, even if the gold is ultra fine (5 to 20 microns).

Visit https://GoldWaveTables.com to learn more today.

We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.

Also learn more about Mineral Processing Plant here.